Search found more than 3371 matches
- 23 Nov 2021, 18:58
- Jump to forum
- Jump to topic
Re: Is there a way to test a 98 EVAP system?
The canister shut off valve is normally open and only closes to test fuel system integrity during the evap cycle. The canister purge valve is normally closed and is opened with a duty cycle to clean out the canister, and also run the evap cycle test. You can put 12V on either one to see if it toggle...
- 23 Nov 2021, 19:14
- Jump to forum
- Jump to topic
Re: The Resurrection of (10/1998 to 01/2021) Elizabeth 1999 V70T5M56 Cylinder Head Job
Thanks for the karma… Quick update today I put the battery on 10 amp charge overnight In the morning, a 2 second shot of ether , tried the key. Sure enough, it was the unchipped one. Idiot! Chipped key, and she sprang to life on second crank. Chugs chugga chugga running in 3-4 cylibers. Pulled plug ...
- 24 Nov 2021, 05:06
- Jump to forum
- Jump to topic
Re: S70 rough running then stall
You will need a longish 3mm hex key to get those rotor bolts off, bit of an oddball size
- 24 Nov 2021, 17:32
- Jump to forum
- Jump to topic
Re: Yet another misfire thread - Cylinder 3 - No compression
For a turbo you need to use the Volvo spec sodium filled exhaust valve. You will only need two exhaust valves, $50-60 each
Inter valve , CRP, TRW all fine for intakes. About $15 each
Inter valve , CRP, TRW all fine for intakes. About $15 each
- 26 Nov 2021, 02:27
- Jump to forum
- Jump to topic
Re: What do you think - is it the fuel pump, PEM or FPS?
If you had fuel pump work done it is really easy to kink the furl crossover line in the tank during that. See the thread here by user “ shockwave”
- 26 Nov 2021, 13:42
- Jump to forum
- Jump to topic
Re: S70 rough running then stall
It needs to be scruplously clean f oil and moisture. Scrape all the metal to shiny brass, clean out the oil with brake cleaner , then get it dry as a desert.
- 28 Nov 2021, 07:58
- Jump to forum
- Jump to topic
Re: The Resurrection of (10/1998 to 01/2021, 11/21- Eternity) Elizabeth 1999 V70T5M56 Cylinder Head Job
We are well inland from Lake effect snow and are surrounded by much colder mountain/hill areas. She started and ran great for 10 minutes this morning but then battery voltage sagged and went into limp. Perfect reminder that a decent starting battery is not sufficient to run an ETM car. I’ll pick up ...
- 29 Nov 2021, 01:42
- Jump to forum
- Jump to topic
P80 1999- serpentine belt install 6DK1841 9458376, 30731808, 9471981
Sneers at you -1998 wankers struggling with that 3/4 square block tensioner… I did a lot of serp belts bringing 4 1999- cars up to 50k PM this year, and did find a quick way to both Route and install serp belts. Part numbers in title, both Volvo and Continental I used a 14 mm wrench and a 2 foot lon...
- 29 Nov 2021, 05:15
- Jump to forum
- Jump to topic
Re: 2021 Thanksgiving NYC
Thanks for the red chairs. volvolugnut I think of you every time I pass them! Caitlin and I rendezvous here each time we travel together, itsCheckpointCharlie on our Maps program Cool! Does anyone every sit in the chairs? volvolugnuth I’ve never seen anyone even nearby; the nearest house is about 1...
- 29 Nov 2021, 12:00
- Jump to forum
- Jump to topic
Re: S70 rough running then stall [Sensor electrical plug corrosion]
Tagged solved and solution summary added to title






