Search found more than 1506 matches
- 16 Feb 2021, 12:47
- Jump to forum
- Jump to topic
Re: Seafoam Before and after pics
EXCEPT the head mating surfaces must be completely flat. A bit fragile there (it's Italian!).
- 17 Feb 2021, 09:57
- Jump to forum
- Jump to topic
Re: Hard to Start After DIY Work
Miley, I own two 3.2s with the same engine as your XC90 both are over 130,000 miles and I plan to keep both to 300,000 or more. If you really like your XC90 I can help you to fix it. If you are selling no matter what then no need to read the rest of this post. The first thing I would do is 1. replac...
- 18 Feb 2021, 04:44
- Jump to forum
- Jump to topic
Re: HU 613 changing source on its own now
I consider it a feature.
- 18 Feb 2021, 11:23
- Jump to forum
- Jump to topic
Re: Hard to Start After DIY Work
Miley, The Thermostat is very complicated. (don't buy an eBay part) I wouldn't trust anything except a Thermostat from Volvo or from Land Rover. The 3.2 is your XC90 was built at a FORD factory in the UK (Land Rover and Volvo were part of the Premier Automotive Group under FORD) The only difference ...
- 19 Feb 2021, 05:46
- Jump to forum
- Jump to topic
Re: 1999 S70 NA AT no start, no crank. Evita! Evita [ bad aftermarket battery cable 9456836]
I had similar trouble with the RAMAC version of the battery cable, bought at IPD and also offered at that time by FCP, on my 850 a while back: Failure: https://www.matthewsvolvosite.com/forums/viewtopic.php?f=1&t=61435 Purchase: https://www.matthewsvolvosite.com/forums/viewtopic.php?f=1&t=47...
- 20 Feb 2021, 09:10
- Jump to forum
- Jump to topic
Re: Hard Starting only when engine is hot.
I'd start with the fuel pump relay (jumper it), then move on to abscate's list.
- 24 Feb 2021, 20:42
- Jump to forum
- Jump to topic
Re: 2004 XC70 oil pan condition
To measure your rod bearings the rod caps have to come off & Plastigage is then used. Without removing/disassembling the engine & mic-ing the journals this is the easiest way. It may not be ultra accurate, but you can at least get an idea of if you are close and also it gives you a glimpse o...
- 26 Feb 2021, 08:19
- Jump to forum
- Jump to topic
Re: P80 Key stuck in ignition C70/ S70/V70
Add me to this exclusive club today, with Shaggkira 1999 V70 The button to the shifter is partially stuck in so I’ll get some lube in it this morning and report back Sometimes the button to the shifter sticks because the knob has begun to work its way off the shift lever. Pop it down with the palm ...
- 27 Feb 2021, 11:40
- Jump to forum
- Jump to topic
Re: P80 Key stuck in ignition C70/ S70/V70
The shifter knobs start to break up with age. You used to get a replacement button from FCP and IPD at reasonable prices, but last time I looked they were a crazy price and I had difficulty finding them. It is easy to pop the shift knob off to have a better look and clean the shift knob. Turn the to...
- 04 Mar 2021, 14:10
- Jump to forum
- Jump to topic
Re: what is that?
It's to mount an external cooler for cars optioned with heated third row seats.






