abscate wrote: ↑08 Dec 2021, 08:22 Sometmes I worry that RIck has fallen into the sar-chasm...

Don't worry I can fly.

Here's one for the 98 C/S/V70 which is Volvo document TP3932202; this link should be pretty stable but ping me if it goes down:

https://mega.nz/file/Bu5xDKTL#CHtqU8IOA ... Oin9bLmA7A

It's 50 ˚F here today! The long bolt with red loctite residue is a factory drive shaft bolt - those go in the flange from the front. On the short bolt that you can use from the back of the flange for driveshaft removal, I think its 12 mm long, you can see the threads are mashed in from using it to d...

This is now at the top of my list of candidates for MVS Thread Of The Year.

ABSCATE If we are going to make that adjustment we will need to Reconcile: the Generally Accepted Accounting Practices vs the Allegedly Acceptable Recordkeeping Practices G.A.A.P. to A.A.R.P. reconciliation First we must confirm compliance to the Part 2 guidelines Note: due to restrictions here par...

Got your other PM, let me know if you decide to try one from a pick a part. But basically, I made white marks on anything and everything to make sure nothing moved out of place when I finished installing the pinion as there was no procedure to be found on what I was attempting. I figured that they h...

Woohoo! Glad it was that "easy".

Is the parking lot at the hospital big enough for all of us ? We're with you, one way or the other !

Truly,
Paul

I’ve been planning to change/refresh the front suspension of our 2011 XC70 (original owner) with 210K KM for some time and finally got chance to get it done this past Summer and I would like to share my experience with fellow Volvo P3 owners who inspired me to get it done. What got me wanting to ref...

We are back, we survived. Betty ran perfectly. Great car, great engine, great tires. I am wobbly.
Dramatic weather - Film at 11.