So I dont if anyone has watched Roberts recent videos. He says he has a manufacturer that is willing to produce new R style front bumpers and possibly another manufacturer willing to make new leather seat covers for the p80 cars. He was asking for comments indicating interest for the manufacturer to...

loveMy850 wrote: ↑19 Feb 2020, 19:03 Going to replace my Radiator early morn. Need a few tips.

What model are you working with?

Make sure everything goes back in the way it came out. That slot in the middle is asymmetric.

With OEM power steering racks becoming difficult if not impossible to find these days, has any tried rebuilding their own steering rack on the P80 cars?

Remove your turbo control valve and airbox and you will see a large diameter hose for the brake booster

That should be sealed from factory. I have no idea how that blew open. It will either need to be plugged or the head replaced.

Ugh those quick disconnects SUCK. Such a pain to release. I bet that orifice tube is nasty, mine was caked up with so much garbage. I guarantee someone used stop leak to try to fix the evaporator leak, but of course it won't work since it couldn't get past the orifice tube. Can someone explain to m...

I ordered the santech o-ring seal kit RS2672 for my AC overhaul. Here are the measurements I got with my caliper. OD x ID x Thickness

Made heaps of progress today. While investigating my AC line vacuum leak I narrowed part of it down to the Schrader valve. I replaced the valve with a new one but did not have the proper tool to tighten it. Went to homedepot to buy the proper tool today but quickly discovered it was too small to eng...