Search found 64 matches
- 16 Jul 2019, 22:29
- Jump to forum
- Jump to topic
Re: How to read 1996-1997 Volvo 850 mileage with an ELM327
**************************************************** volvo850diag v0.9 is now available! **************************************************** There is a new volvo850diag v0.9 version (dated 2019-07-14) available for download as: https://jonesrh.info/volvo850/volvo850diag.zip It's the first update i...
- 28 Aug 2019, 07:53
- Jump to forum
- Jump to topic
Re: What did you do to your Volvo today? (now Sticky)
Found a perfect fender panel in the junkyard Monday. Does anyone know how to install the outer door trim? Does it just snap onto the plastic pieces or is it better to slide it on? Are you referring to the plastic trim that runs along the lower side? That should just snap into place, there are clips...
- 02 Dec 2019, 19:57
- Jump to forum
- Jump to topic
DIY: REAR Suspension Rebuild (2005 XC90 2.5T AWD with 120K)
DIY: REAR Suspension Rebuild (2005 XC90 2.5T AWD with 120K) - The usual symptoms: car drives “like a boat” with vague feeling. - Inspection showed bad shock absorber, coil spring all rusted. - This DIY on a V50 have some useful info on how to use floor jack to compress the coil spring. Interestingl...
- 28 Apr 2020, 20:00
- Jump to forum
- Jump to topic
Re: Corona bench tear down of,a 1999 9171703 AC comppressor
That front seal is the hard to find/ expensive part.
1/4 the cost of a new compressor
1/4 the cost of a new compressor
- 03 Oct 2020, 03:12
- Jump to forum
- Jump to topic
3D Printable Fuel Cap Retaining Ring Tool
Hey gents, I'm planning a fuel pump replacement on my '06 S60 2.5T, and as I was reading this guide ( https://www.matthewsvolvosite.com/forums/viewtopic.php?f=9&t=67480 ) I realized a special tool is required to remove the pump retaining ring. Since the tool doesn't look like it needs to be supe...
- 05 Mar 2021, 03:55
- Jump to forum
- Jump to topic
Re: Volvo 850 '97 Project - One Collision [56K warning]
Okay got finally "finished" SC-805 CD changer arduino aux bluetooth thingy project. Here is all i got at. Enjoy and be free build one and enjoy better AUX mod. SC- radios has Mbus and newer HU- has Melbus. Here focus on first one. Nicely detailed info of Mbus is here: http://www.hohensohn....
- 07 May 2021, 08:17
- Jump to forum
- Jump to topic
Re: RobertDIY - A Radiator removal and replacement WARNING
Thanks for the support and comments. Although I don't watch a lot of other instructional videos, I can say this about my videos... 1. I try to produce my instructional videos so that a 14 year old person can complete the task. 2. Best effort to do it safe for the DIY person. I don't like getting hur...
- 04 Sep 2021, 11:29
- Jump to forum
- Jump to topic
Re: Finding generic parts like vacuum lines and clamps
I've found manufacturer catalogs to be very helpful in finding the generic parts. Oetiker is here: https://www.oetiker.com/-/media/Files/Oetiker/Downloads/Public/Product-Catalog/Oetiker_Product-Catalog_EN.ashx Gates is here: https://www.gates.com/content/dam/gates/home/knowledge-center/resource-libr...
- 06 Sep 2021, 06:08
- Jump to forum
- Jump to topic
Re: What did you do to your Volvo today?
Nice work! Which capacitors do they require? There is a 22uF and a 100uF capacitor that usually require replacing. (Digi-Key 565-1304-ND and UVY1E101MDD-ND, respectively). Most were probably "good", but I'd actually forgotten that I had this many. I had no idea on the fitness of them all,...
- 14 Oct 2021, 16:36
- Jump to forum
- Jump to topic
Re: 3D Printable Fuel Cap Retaining Ring Tool
Sorry for the long delay here, all. I ended up leaving my fuel pump alone for now as it seems to be working alright and is keeping AFRs where I want them with my current tune. That said, I did update the STL file for this thing based on the provided measurements and I attached it to this. If anyone ...






