The worst case would be a hit with pin 00 99 99 99 99, which would take almost 63 hours at your speed. Do it in hexadecimal. 256^3 / 445 / 60^2 = 10.47 hours max. Six times faster. In hexadecimal you will find a PIN in the range of 00 00 00 00 00 to 00 00 FF FF FF. If you want a BCD PIN you can run...

I want to try out that *should* speed up the cracking time after a timeout happens and a new seed is requested. (Assuming I didn't miss something in your code that I've read through so far.) :wink: The P3 does not have a timeout. P5 ( CMA ) & P6 ( SPA ) are the ones with timeouts. What is your ...

volvolugnut wrote: ↑21 May 2022, 11:51 Educate me. OSA is?
volvolugnut

Optical Society of America old name for Optica.

Sounds like the connector was producing a high resistance on the V-bat or ground line. If it does it again clean the connectors.
Most likely tarnish and it does not take very much.

scot850 wrote: ↑29 May 2022, 20:23 This is the bulb:

Looks like Sylvania 2721 or equivalent.

The odds of a cracked block on a B5244T3 are pretty slim. You description points toward a head gasket maybe some head warpage but not a cracked block or cracked head. Mixing of oil and antifreeze in the crank case or cooling system would be a give away for a cracked block. How does the engine run as...

abscate wrote: ↑27 Jun 2022, 21:44 It is a massive amalgamation of buzzwords and concepts with a complete lack of understanding of any of them.

To put it scientifically .. it's a goober.

Forever Black will bring the bumper covers back to life. De-greaser and a Power Washer could clean up the oil stain in the trunk.

Thank you for letting me know what to use on the bumpers and trunk! June Working with Forever Black is like working with Latex paint. It will wash right off with water .. if you do so before it dries. Work the shade. In direct sunlight the Forever Black will dry to fast. That can be a problem if yo...

Not trying to hijack the thread, but does anyone have links to the "Car Config Editor" software? Successfully read the flash from my '05 XC90 CEM-H, and I'd like to change some parameters. Thanks in advance! V olvo C ar C onfig E ditor V2.5 does not read flash files. With VCCE you need a ...