There are no arguing the AWD NLA parts issues. Rear brake back plates, R rear calipers, some of the rear suspension bushes and the like. However, recently some aftermarket manufacturers have started to supply some stuff, quality TBA. There is IPD selling I believe PPS fuel pumps at about 20% of the ...

That should not be a problem since there are plenty construction hydraulic machines services who can replace and press in a new hose on old connections/hard lines.

Also if needed...they can make and replace old hardlines.

Save the end connection and swage in NiCopp to fit. They were available about a year ago as I did one on Grunhilde

If you need the entire line,
aftermarket is certainly out there.
You can start with eBay as a baseline.

Spring has arrived at last...

I am not a fan of RTV. It can cause corrosion from the acetic acid and the crumbly bits that get loose work their way to other areas and cause problems in valves.
volvolugnut

It's for keeping the black rectangular O ring between motor and oil thermostst in place during installation. otherwise it supposedly falls off too easily. Is the car suffering from the Leaky Line syndrome ? Lots of people here just eliminate the lines and put on the N/A 'delete' plate 1366780. In e...

.
I believe it was bmdubya1198 that mentioned in another post about wedging a piece of cardboard instead of the wood to open the hood.

viewtopic.php?p=636828&hilit=hood+latch+s70#p636828
.

I want to believe that the oil cooler does something good when forcing my wagons up mountain passes or around racetracks - even though we know that the RN oil cooler was the far superior design. It's for keeping the black rectangular O ring between motor and oil thermostst in place during installat...

Ours are only a single filament bulb, and are only wired into the turn signal circuit. They're only on when using the turn signals/hazard flashers and when the lights flash when locking the car with the central locking.