any more info on that projector retrofit? this looks amzing Sorry, not trying to hijack the thread, but... I got the kit from The Retrofit Source and used stock housings with lenses from the C70 (clear). -Stock/OEM housings -Morimoto Bi-Xenon Mini H1 -Clear lenses The bi-xenon is cool because you c...

Ahhh HAH! Found it at tasca -and other places since I found an OE part number !
For those who were curious - Washer - Volvo (1387906)

https://www.tascaparts.com/oem-parts/vo ... er-1387906

If it's hydraulic tensioner...it's the only thing you actually need to remove.

Looks spot on.

I have had two of them that were a full tooth off on both intake and exhaust when I went to do the first timing belt change after I bought them. It isn't as uncommon as you might think. The cars ran OK even with the timing off but ran better with it correct.

...Lee

Don't forget to reset fuel trims after timing belt re-check by disconnecting neg.batt.cable.

Those special screws must be effective. Not one post on this site about a stolen MAF sensor...........

Dash squeak is a feature, not a problem

shawneesnaketail wrote: ↑05 May 2019, 13:32 as well as removing my catalytic converter.

You are not looking out for the survival of the species, do you really expect others to look out for the survival of your property?
Are you are you Self centered or Sociopathic?

I have a clunk happening just like what you are describing with my 850. I think your mechanic is right on when he is saying that it comes from the front brake pads having too much play. Mine started happening right after I replaced the brake pads. Old ones no clunk- new ones clunk, so I know that th...

Are your caliper springs in good shape and in position correctly? The caliper will clunk if they are missing.