I did as you said and installed the camshafts like that. I will be doing a start today if time is forgiving. Also it's 30c today, humid and my concrete garage is like an oven. For reference, it looks like this https://imgur.com/iY8mjAB I only hope I did not cause blown crank seals, I mean the one on...

Got Missy into her place in Brooklyn. Do not miss the fight onto Manhattan!
Only 75 minutes by car to see her , 90 minutes by train!

Old land rovers , caddy , swans.

15 minutes of smoke and clatter then Shagg settled into silky smooth idle

Question: how do you keep all the subtle routing of hoses straight in the engine bay?

Answer: pop the hood on of your other 4 1999s…..

I received my parts and gaskets yesterday. I lapped the valves last night and installed them w/ new valve stem seals tonight. I cut the heads off of two of the old head bolts to use as guide pins for when I put it back together on Saturday. I installed new float needles and re-baselined the carbs. I...

Yo !

Exams results : Manov admitted : 17/20 !

Perfect! Includes dryer lint with spontaneous combustion feature.
volvolugnut

I was tired of getting dirty, so I attempted to change my brake pads on Saturday using only the power of my mind. I'm still here, under the car.

Extending any car life past 12 years is greener than buying the most efficient car in the world

Completed all new cooling group hoses on sahgg. Top bottom radiator Reservoir pipe Heater hoses All oetiker clamped Power steering hoses oetiker clamped Flushed and fresh coolant in Shagg Worked through the exception sheet on Shagg Checked coolant system for leaks Installed air guide Installed last...

Volunteered to do an oil change. Afterward started car to move it and when I put it in drive it was like neutral. Motor revved but wouldn't move. I had drained the transmission fluid. Motor had 10 qts of oil in it and trans was empty. Car was my dad's 69SS Camaro pace car. I was 10 years old.