Search found 6 matches
- 12 Oct 2018, 21:41
- Jump to forum
- Jump to topic
Re: PLEASE HELP! OIL TRAP HOSE MISSING!
Your signature says it is a 2004 S80 - intake looks like a 6 cylinder. It appears your oil trap is for chassis number 240000 and up. Part number for the oil trap is 8670306 (as you posted), and the pipe you have showing could be 9497569. It is hard to tell from the pictures whether you have the righ...
- 19 Oct 2018, 12:35
- Jump to forum
- Jump to topic
Re: Oil Trap Hose Missing
Look at the pictures. The side hose that you have going up, in all the pictures of the PCV box I pull up, comes with the unit. It appears to go to the left, driver's side and attaches somewhere facing the block at a distance of the hose length, further to the left. Left is to the right, but the engi...
- 17 Nov 2018, 13:24
- Jump to forum
- Jump to topic
Re: Fog Light Not Working!
You don't need to fix anything. There is only one rear fog light. Two rear fog lights would get confused for break lights.
- 17 Nov 2018, 14:15
- Jump to forum
- Jump to topic
Re: Fog Light Not Working!
There’s only one.
- 15 Jan 2019, 18:15
- Jump to forum
- Jump to topic
Re: If you own a 6 cil 2.9l NO turbo S80, read this. I need your help.
OK I hope this helps. It goes from the front of the separator up through the bottom of intake to the nipple on the upper intake where the clamped hose in the picture goes. Nothing more. This is a very simple system compared to the 5 cylinders. Below is another shot of it coming off the front of the ...
- 15 Jan 2019, 18:27
- Jump to forum
- Jump to topic
Re: Oil Trap Hose Missing
I just posted more pics in your other thread on this.
Scot
Scot






