Shorter oil change interval will not prevent oil condensation and milky dipstick from frequent short trips in cold weather....the fact is that it can appear in a few days after oil change....and vanish the same day after longer driving. The issue to care about is water and fuel buildup in the oil t...

I'd stick to 50 profile at most to keep reasonably within specs for circumference.

It's a separate three pin connector just behind each headlight. Easily accessible without removing anything. It looks the same on both sides which nothing else does really.

The T6 drivetrain is generally considered quite bomb proof. Apart from that the same as any other P3.

A P2 R is lighter and sleeker looking though imo.

Similar to an XC70 but a bit more planted is probably fair. It's not a huge difference in ride height and they're both, by European standards, road ships designed for relaxed journeys rather than active and precise driving. There are some bushings in the rear that require replacement since the ride ...

The biggest one is always safe if price differences aren't too big. The only reason there are options is to save money when making the cars.

If it goes bad when you replace the fluid it was already bad but just hadn't shown it quite yet.

If you really want to play it safe then add an inline filter to the return line then replace what drains from the pan a couple of times with some driving in between.

After having two sets of German made Zimmermann brake discs warp on me I bought a set from Bosch instead. Made in China. They've been excellent so far. I'm more concerned about the brands reputation than country of manufacture personally when it comes to parts that unlike for example oil don't have ...

Why lift? There are reenforced springs that keep geometry and handling stock (a tad stiffer in the rear perhaps) but also keep the car from sinking too low when loaded, if that's the issue. Some lifting when replacing old and worn shocks and springs is to be expected regardless though. My V70 probab...

Speaking about what's possible with enough work.

https://engineswapdepot.com/?p=35398