While I diagnose the issue I'm having... battery is disconnected and yaw rate sensor has been pulled out. Is it safe to reconnect the battery and drive without reconnecting the yaw rate?
... while I order a new one or have mine reconditioned.
Search found 16 matches
- 19 Jan 2020, 12:39
- Forum: XC90 1st gen 2003-2014
- Topic: Is it safe to drive w/o yaw rate sensor
- Replies: 0
- Views: 1030
- 13 Jan 2020, 11:44
- Forum: XC90 1st gen 2003-2014
- Topic: 2007 XC() Fuel injector O ring size 30777501
- Replies: 12
- Views: 5347
Re: 2007 XC() Fuel injector O ring size 30777501
Yup... confirmed there is no more smoke.
Thanks all.
Thanks all.
- 13 Jan 2020, 11:32
- Forum: XC90 1st gen 2003-2014
- Topic: Rear fog light ... one or two
- Replies: 1
- Views: 1955
Rear fog light ... one or two
When checking which bulbs needed to be replaced on my 07 XC90, I wondered who could have possibly stolen my rear right fog light wiring harness! LOL
... Then I came across this article which explains why vehicles have one rear fog light. Thought I'd share with others that wondered the same.
http ...
... Then I came across this article which explains why vehicles have one rear fog light. Thought I'd share with others that wondered the same.
http ...
- 07 Jan 2020, 18:51
- Forum: XC90 1st gen 2003-2014
- Topic: 2007 XC() Fuel injector O ring size 30777501
- Replies: 12
- Views: 5347
Re: 2007 XC() Fuel injector O ring size 30777501
Abscate Thanks
Here are the sizes for the O - rings as measured by my calibrated calipers
Green
I.D. 9.5 mm (.374")
O.D. 15 mm (.591")
Thickness 2.9 mm (.114")
Brown
I.D. 7.5 mm (.295")
O.D. 14.5 mm (.571")
Thickness 3.5 mm (.138")
I haven't found an aftermarket source
But as shown ...
- 07 Jan 2020, 18:49
- Forum: XC90 1st gen 2003-2014
- Topic: 2007 XC() Fuel injector O ring size 30777501
- Replies: 12
- Views: 5347
Re: Fuel injector O ring size
Does this sound like something to be worried about? Any thoughts on what it might be?
White "smoke" is steam and there is only two sources of water. Condensation in the exhaust system, which should blow off as the exhaust system heats up and the coolant system. How is your coolant level? Any ...
- 05 Jan 2020, 21:11
- Forum: XC90 1st gen 2003-2014
- Topic: 2007 XC() Fuel injector O ring size 30777501
- Replies: 12
- Views: 5347
Re: Fuel injector O ring size
Follow up question... Removed fuel rail, cleaned everything, replaced sensor, greased o rings with synthetic grease, and re installed. Car started up great. Check engine light is gone
... but, fuel injector # 4 is emitting a light but steady stream of white smoke. Only #4 (inline 6 cylinder).
I ...
... but, fuel injector # 4 is emitting a light but steady stream of white smoke. Only #4 (inline 6 cylinder).
I ...
- 05 Jan 2020, 21:06
- Forum: XC90 1st gen 2003-2014
- Topic: 2007 XC() Fuel injector O ring size 30777501
- Replies: 12
- Views: 5347
Re: Fuel injector O ring size
Thank youpgill wrote: 05 Jan 2020, 21:01 [font=][/font]3DDA5FF7-C493-4D5D-85A1-241B9D9EC94B.jpeg
B159137B-4934-4713-A6EA-B7FB5DC55FCD.jpeg
6BEEB1D4-DDC2-4E1C-8603-C51D1B888275.jpeg
85A38DAC-7A85-416A-8127-AA3CB2426FEE.jpeg
A8425C5F-0BF9-4882-8FE0-62C52FC2D8D3.jpeg
0974586D-7EEB-453C-B1DB-E154F391CBBA.jpeg
- 05 Jan 2020, 15:54
- Forum: XC90 1st gen 2003-2014
- Topic: 2007 XC() Fuel injector O ring size 30777501
- Replies: 12
- Views: 5347
Re: Fuel injector O ring size
Hardware store o-rings for plumbing are not petroleum/gasoline compatible so won't do.
I did remove more than one fuel rail and never got a seal damaged. Always put them back in and no leaks - but I clean every surface realyl well and very important - with both new or old ones - smear the ...
- 05 Jan 2020, 12:27
- Forum: XC90 1st gen 2003-2014
- Topic: 2007 XC() Fuel injector O ring size 30777501
- Replies: 12
- Views: 5347
2007 XC() Fuel injector O ring size 30777501
Anyone out there know what O ring size is used for fuel injector? I believe fuel injector is part # 30777501 and o-ring set is part # 30713614.
I need to remove the fuel rail on my 2007 XC90 3.2 FWD to access screw that holds the pressure sensor. My understanding is when removing the fuel injector ...
I need to remove the fuel rail on my 2007 XC90 3.2 FWD to access screw that holds the pressure sensor. My understanding is when removing the fuel injector ...
- 06 Oct 2019, 10:33
- Forum: XC90 1st gen 2003-2014
- Topic: Reusing coil springs and mounts
- Replies: 14
- Views: 2950
Re: Reusing coil springs and mounts
I ordered some parts from AM as well but many were pretty bad so going to avoid their struts. They were quick to refund me though but I've heard others were not so lucky. I'm leaning toward Meyle for sway bar links and Lemforder for other suspension parts.
Ultimately thinking to go with Bilstein ...
Ultimately thinking to go with Bilstein ...






