Ok thanks!

The wiring is correct.

In the basics: cam sensor with 3 wires . 1. Power 2 signal 3 ground .

Is it normal to have. 2 powers instead of 1power and one ground?

Thanks all!

The bleu/black Wire has 3 volt on the connector to the cam sensor. (Connector disconected)

Red/white 5 volts

Measure with a multimeter. With the ground on de enginebay ground spot.

What i notice is that they replaced the connector on the cam sensor side.

The black cable is in the middle.
Blue ...

About the Volvo specialist.


I'm not going to post a reference but ... its a specialist in Volvo V70 🙈

diagnosis cost me a total of 800 euros without result.

1st time diagnosis. 6 hours of work. replaced the cam sensor and housing (before it was steel, now its a plastic one) cost 600 euros ...

hi guys
I have a Volvo V70 XC. built in 2002. 2.4 turbo

Fault code: P0340
Volvo fault code ECM-3000

fault can be cleared. after starting, the fault immediately returns

The Volvo specialist checked the timing of te timingbelt and is it stil correct. They replaced the CAM sensor. Also they measure ...

Hi There

My Volvo xc70 has the same problem. Do you know want caused the problem.