Solved!

I was able to find a 89 740 at the junk yard and grabbed the one in there for both sides can likely rig something if sizing is a bit different.

Thanks everyone!

( if anyone in the future finds this post and is good at 3d printing, seems like it could be lucrative.

volvolugnut wrote: ↑24 Nov 2025, 08:01
Alternate repair possibility: If the width of the fork is the same as the 240 part, a pair of 240 fork halves might be glued together to make the longer 760 part.

Extremely smart and resourceful!

Hey y’all! I reached out to IPD and they pointed me here. I am working on trying to save a 91 780 The driver window won’t go up even but can be guided up before dropping crooked I took the door apart and found this broken plastic bit that I believe would be the culprit However I can’t find this piec...

I have a 1994 Volvo 850 NA that is giving me what I believe are PNP switch issues. I went to read the codes to make sure before I jump into replacing, but the ODB1 port is giving me issues. I've used the ODB port a dozen or so times in the past without issue, but currently it seems to be broken of s...

z

Cool to throw a hockey puck and use even though its bent?

Honestly forgot I posted this, but want to update that a beautiful 91' coupe with 85k miles came into my life 11 months later.

That law of attraction shtick may be real.

( I needed a volvo to have a volvo when my other volvo started to volvo )

Really good advice, thank you!

I saw on one of the control arm videos from fcp or ipd that they unbolted the shocks and used a jack to raise to get it level. Any rec against that method?

Would love to see pictures if so.

Looking for a 940 with the tan interior, that normally would have tan leather seats -> swapped for black leather seats from another 940 or similar series

hope that make sense!

There's a lot of guides and videos for the inner / outer tie rods likewise, there are several good ones for the control arms. I have all the parts to do all ( I hope, lol ) and was wondering if there were any shortcuts but more importantly, I was looking for guidance on recommended order of executio...