What happened so far: I bought a replacement srs module, deleted the crash files on that. put my old chip on the replacement. then it worked but showed some error that I couldnt fix. (Turn passenger airbag on/off) my car has not a button for that. Maybe the replacement was in a car that had this fea...

Why are you so eager to replace parts without testing? Ok, you will find a used unit and try to plug it-it will not work since will need programming to be vin specific. You will need some good programmer to erase old vin and rewrite new your vin. Dealer will not even touch your car and will say tha...

Hello again,
I've change the velt pretensioner.
The old one had 3.2 MOhms
The replacement 23 MOhms.
I earsed error codes with icarsoft and VIDS and got the messages in the attachment.

Next step will be take out the srs module and find an replacement...

I found this video.

He said if its the exact model of the module a plug and play works. It needs a calbirations whatsoever on the car. i don't know how to calibrate it.

With anything past 1998 it is safe bet that you will need to program the module. I think modules are close to $900 plus necessary instalation and programming. Before calling the module I would want to be absolutely certain the module has everything it needs to operate(meaning power(s), grounds(s), ...

Today I took out the seat and removed the seat belt pretensioner. The sensor is defective. It had no change in Ohms or electrical flow. I made a bridge to simulate a closed seat belt and the SRS module is still showing of the same issue. I ordered another seat belt pretensioner and maybe I will need...

Vova585 wrote: ↑10 Jun 2025, 15:19

Found this on quick search. Hopefully will help somewhat

Thank you for the video, mine is a bit different tough but this helps too

jonesg wrote: ↑10 Jun 2025, 14:42

bumbumtschak wrote: ↑10 Jun 2025, 08:54

jonesg wrote: ↑10 Jun 2025, 06:34 when you turn the key does the seatbelt chime warning sound ?
does it go away when you buckle the belt.

no warning sound of the seats

did it used to chime?
if no, see if the chime is turned off with vida.

Yes it used to chime when I was driving unbelted.

I don't see any srs codes. It shows multiple codes for "lost communication with srs module" that's why me and David E7 were leaning into checking that module first. I think in Vida there should be information about how to locate the module(still think it will be below arm rest of the fron...

jonesg wrote: ↑10 Jun 2025, 06:44 search youtube , this one is rover but he says its similar to volvo.

do I need to unscrew the seat too? I found the explosion drawing of the seatframe and the front belt in VIDA. I'll try my luck