Have a P3 XC70 and live in Boise? Great! We need a test bed for a prototype lift kit. PM or email [email protected]

I also meant to add site email: [email protected]

carboncow: We’ll focus on the springs for now, but I hope to add the light bars, skid plates, etc. in the near future. matthew1: Agreed! I got the current XC70liftkit domain while working on the transfer. I plan on keeping the Bad Swede name and redirecting as needed. Also, thanks for the awesome si...

We're up! Rod was looking for someone to take over operations and I jumped in. You can find us at http://www.xc70liftkit.com/ while we work on transferring the old badswede domain. Springs should be ready to ship by August 15th, although you can preorder at the site now. I've got seven sets left. We...

Thanks again, xHeart! That did the trick.

Many thanks, xHeart! The hairdryer will help, no doubt. I'll get in there and try it again over the weekend.

The rocker arm in my shifter broke, allowing the shifter to swing freely between D and Manual (Geartronic transmission).I've gotten the trim plate off and removed the shifter knob and boot. I'm stopped and stumped at removing the shifter stop plate (see photo). I see that the u-shaped tabs are part ...

Is there a source for ordering the tether anchor for second row seating in a wagon? I've not yet been able to find it listed anywhere or even a part number. If anyone has a spare, I'd be happy to buy it.

I was checking the oil and ATF levels when I noticed a loose wire next to the firewall. I've recently done a lot of work on the driver's side of the engine but never came across this wire. It's green with a red stripe, attaches to the loom running along the firewall and around the driver's side shoc...

Someone elsewhere suggested pressure testing the heater core prior to replacement to save trouble. Anyone know how? Seems like a great idea before wading in to that job!