Login Register

Search found 16 matches

by kgfar
25 Jun 2016, 08:22
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: Vehicle Speed Sensor A Code
Replies: 4
Views: 1299

Re: Vehicle Speed Sensor A Code

Thanks for the information gentlemen. I went to your website Matty and read that you can read the abs codes on my original module? My Foxwell only gives me the VSS A code, so I will be sending my original module to you for reading and repair. thanks again.
by kgfar
24 Jun 2016, 11:43
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: Vehicle Speed Sensor A Code
Replies: 4
Views: 1299

Vehicle Speed Sensor A Code

Hi gentlemen, I just took my 2000 V70 n/a off the jack stands and out of my barn. I'm working with my grandson to get it back on the road, so he can use it for his senior year. Everything seems fine, new exhaust, pad and rotors, tuned up and a complete fluid change. Looks good, runs great. One ...
by kgfar
21 Dec 2011, 17:29
Forum: Car Talk & MVS Itself
Topic: Happy Holidays
Replies: 2
Views: 637

Happy Holidays

I just signed on to thank all of you for the great advice this past year and to wish you all a Merry Christmas!
It's finally getting cold up here in Massachusetts and thanks to all of you I'm ready for it. Have a great holiday.

Ken
by kgfar
09 Dec 2011, 14:08
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: ignition cylinder
Replies: 5
Views: 782

Re: ignition cylinder

Already ordered new one. My car has 177,000 miles, just broken in. Thanks for the advice.
by kgfar
09 Dec 2011, 13:05
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: ignition cylinder
Replies: 5
Views: 782

Re: ignition cylinder

I took Lee's advice and removed the electrical switch, still hung up. I then sprayed that side of the tumbler with a lubricant and after two three wiggles it worked. The only problem I had after that was I had to take the key back out to put the sensor ring back on! I took it off when I sprayed the ...
by kgfar
08 Dec 2011, 19:20
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: ignition cylinder
Replies: 5
Views: 782

ignition cylinder

I have a 2000 v70se with a ignition cylinder problem. I have gone through the various threads and know it is time for a new tumbler. Before I buy it I just want to make sure that is the problem. When I insert the key it will not turn at all,it will not go to position one. I have tried wiggling it ...
by kgfar
19 Aug 2010, 17:48
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: ets light check engine light and all gages
Replies: 4
Views: 1002

Re: ets light check engine light and all gages

Thank you, but I'm still trying to understand why this happened. Did a problem with the etm cause this or was there another problem that is going to reoccur?
by kgfar
19 Aug 2010, 16:59
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: ets light check engine light and all gages
Replies: 4
Views: 1002

Re: ets light check engine light and all gages

Just to let you know, someone on another site recommended I do a master restart, disconnect the battery and touch the leads together to reset the cluster, then reconnect the battery. I just did it, now the cluster works, the ets light went out, the check engine light went out and the car runs smooth ...
by kgfar
19 Aug 2010, 14:02
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: ets light check engine light and all gages
Replies: 4
Views: 1002

ets light check engine light and all gages

I know you have many many post about ets light and check engine light being on at the same time, but I have not found anything that includes cluster gauges also not working. Just happened. Car runs rough, but runs. 167,000 miles.
by kgfar
04 Jun 2009, 18:38
Forum: 850, S70, V70, C70, V70-XC 1992-2000
Topic: 2000 v7o se worn driver's seat
Replies: 4
Views: 633

Re: 2000 v7o se worn driver's seat

thank you, I'll let you know how I make out.