Daughter is out of state with 2002 s60. noticed vibration from from end at certain speeds. boyfriend says the CV axle boot is dry rotteded and leaking grease. can it be driven safely back home for repair here? does it make sense that car would exihibit vibration from front from this, or would a bad ...

Thank much for advice - I did notice several splash shield bolts missing which may have given the squirrels easier access. new bolts on order, but odd they fell out in such a short time. I didn't do last oil change though, so mechanic may have been lazy. Have rat poison under hood while car is await...

I need to repair squirrel damage to a set of wire which I think support the fue injection system. See image, right arrow. I will try repair, and need advice on the guage of wiring to buy. And any pariticular advice as to repair process - in intend to splice in and solder the 3 damaged wires. The sma...

2001 S60 T. car ran rough on start and I found where a squirrel has chewed through a hose and small wires. On the photo I need help identifying the parts and any advice on repair. the small black hose appears to lead into an inline filter. the up arrow oints to where insulation was chewed away on tu...

1998 S70 Auto trans. Son can't get ignition key out of stearing column. Says only thing he's done differently is push down the ovedrive button but says button didn't depress all the way. Don't see how they are related. He's driven the car and moved the stearing back and forth. Any suggestions? Thank...

98 volvo s70 non-turbo needs new radiator.

any advise on buying a replacement & where to get good installation instructions? Doesn't look simple.

thanks

'98 volvo s70 with 170k Radiator leak is near top next to hose. Appears to be results of leaking seal as it is coming from a place where two parts of radiator are joined and clamped. Bubbling out and loosing about a liter per day with normal driving. Is there a repair compound that I can use to seal...

98 s70 would not start but would jump start 2 days ago. battery would not hold a charge so bought a new battery from autozone yesterday. Car cranked fine right after installing new battery. This morning car would not start even when trying to jump from my truck. It turns over but does not fire. Low ...

Low compression in 2 cylinders and have to replace head gasket (Likely head gasket failure according to mech). Does head automatically need to be machined, or do I just have the machining done only if out of tolerance? Mech claims need to automatically machine head as part of gasket change.

Questions: How is the car running? If you have 2 cylinders not firing it should run like crap. What are the actual compression test results by cylinder. It should be around 180 - 190 on a good cylinder. If it's under 125 or so then you'll need to look into it. If it's zero in one or more cylinders,...