Hi, I have a 2006 V70 turbo and it started running rough recently and giving me check engine message.

I took it to the shop and they changed fuel pressure sensor but the same problems started right after I left the shop.

Now mass air sensor ahs been changed and it is still giving me problems.

It ...

Hi; I am wondering if anybody has had an issue with filling their car with fuel?

If I put the gas pump in and give it a full squeeze, the fuel comes shooting straight back out of the collar so I am having to squeeze gasoline in super slow now.

Let me know if you are familiar with what is happening ...

Hi Bill; thanks very much for the information.

I spoke to a guy at trirerack.com and he said I would be fine with 205/555/16's. I asked about Bridgestone Blizzaks and he recommended a Bridgestone WS60 which I'm guessing is a more aggressive snow tire.

Is it a general rule that the better the grip ...

Hi; I have a set of 205/55/16 Pirelli snow tires on my wagon and the grip is terrible.

My friend advised going to a 195 or even 185 profile in a 65 series but the folks at tireack.com say I have the correct tires on.

Does anyone have any advice on this subject?

Also, my mechanic has a set of snow ...

I jsut purchased a 2006 V70 with 17" rims. I am preparing to get winter tires and a friend offered me snow tires of 15" steel rims for an 850.

My questions are

a) would these wheels fit OK

and

b) would this type of change mess with the speedometer or fuel sensors?

Thanks, Mike

All right then, that solves that issue.

Thanks again, I really appraciate the help.

Regards, Mike

Thanks very much for the information.

When you say that they will stick out 20mm too far, do you mean that you cannot properly tighten the nuts when the rim is placed on the studs?

Thanks, Mike

Hi; I just joined the forum but go back a long way with Volvo's. I've owned everything from a 144, P1800 coupe right up to my latest purchase, a 2006 V70 2.5T.

I have a set of 16" windmill rims from my old 740. Would these fit on my 2006 V70? I'm not sure if the bolt pattern is the same or if there ...