I was wondering if any one had this happen you? I was stopped at a stop light and then the car temp gauge started to jump up slowly but, when I started to move again the temp came down some. Thank full for cold weather kept the motor from over heating. The radiator hand heater core have been replace...

For this I would get a new OEM cat that works for your state EMS. Junk yard ones can have problems or they may save you some time until they go bad also. I say check with Mathews sponcer sites first then maybe FCP Euro parts. Just make sure that the new part is OEM so that they will fit and work for...

I am not sure about the in side reflector. but to clean the out side plastic, one can use regular tooth past and a buffing cloth. Just keep the tooth past damp. As for the reflector inside has any one ever tried to use chrome paint or to electrostatic a new lair of Alumnae or some other metal that c...

In changing the brake pistons, (calipers) I have had some luck in just filling them with a hand oil pump. Then bleeding the rest of the air out. In pumping the pedal I have heard that it can cause more problems because the end of the slide is now corroded because of lack of use. If you do know how o...

To all, I am trying to locate a 1993 MAF sensor for my car. The local Volvo part counter states they can no longer get this part. My car has the sensor attaches to the tubing that is part of the air box and not that separate part like the newer models have. I have been thinking about getting one fro...

After reading most of these post i am thinking I will need to get out all of my old primmer books and re learn my English. Hum maybe i should start using Ireland's form of English. American English is abit hard to fallow depending on which part of the states you'r are in. Like a person from Maine so...

No, I only had a paper air filter.

I am wondering if the injectors could have been leaking some or putting too much gas in the intake could have caused this? (just mind storming here)

Sad to say it is the top half that is partly melted and the tubing that goes to the intake is melted. I am wondering if the injectors could be damage or were leaking to cause this. As of now i am looking at a new or used upper box, mass air meter and the tubing to the intake. Maybe the injectors too...

To all Wonder if any one ever had this problem, my air box caught on fire as i was driving on the Washington DC belt way at speed. The car was making a sound something like electric arcing in the cabin for a hour or so. (thought it was the steering wheel just needing oil). Then the motor stalled, I ...

Is their a way to adjust the rails so the sun roof can have a tighter seal?
I hope so for my next move may be to seal the sun roof with caulking.

Frank