Update - found wire was broken where the seat pivots forward. Replaced airbag with new one and with the fault fixed the Autel was able to erase the SRS code.

OK, here is an update - seeing as I couldn't reset the fault myself I decided to bring my car to the mechanic. He said that he unplugged the plug (pointing generally to the front seat area) and plugged it back in. When he started the car, the car didn't find the fault and turned the SRS light off (s...

Unfortunately I get a linking error when I try to connect via EOBD. Tried several times. It pauses on certain protocols but can't link for some reason.

Thanks Mike! Anyone in the Bay Area (Mountain View) have this setup that I can use to try and reset my SRS light?

I have a 2001 Volvo C70 and the SRS light recently came on. I have an Autel MaxiDiag EU702 reader that can tell me that the SRS light is on because of the driver's side seat side airbag but unfortunately the reader can't reset the SRS light. I believe I kicked the connector loose and this is the rea...

As the subject indicates I have a 2000 C70 HT Coupe and a couple of weeks ago the SRS light turned on. My OBD II couldn't read the code and I was hoping to be able to reset the SRS once I figured out the problem so I ordered an Autel MaxiDiag. The good news is the Autel MaxiDiag was able to read the...

Lee, Thank you for your feedback. I'll look into buying the new connector at the Volvo parts counter. It seems that all the plastic parts on a Volvo are brittle. Perhaps it is the extra heat from the turbo. I tried to get my ETM replaced by Volvo as it approached 100K but they only cleaned it for me...

There is so much information on this forum that I'm having difficulty putting my approach together. For a while now my ETM light would come on and go off every once in a while. It mostly says off and there have been no real driving issues accept a pulsing/slight bucking under hard acceleration. I wa...

Car: 2000 C70 HT Coupe with manual transmission Issue: Every once in a while it feels like the engine misses. This usually occurs when the car is under load and I'm trying to accelerate (e.g. on the highway and press on the throttle a lot to accelerate, or sometimes when I'm starting from a stop). ...