I actually thought it was bad plugs causing the no start condition so I installed new ones today still nothing. They were clean and dry when installed. Old ones were excessively worn

Recently changed thermostat and now car won't start. Nothing has been disconnected except coolantbottle sensor. I checked codes witch obd2 scanner and there are non. I have spark, fuel pump runs, and cranks over normally. Just doesn't hit even once. I checked pickups on both crank and cam cleaned th...

UPDATE: Thanks for the confidence, yes I did line everything up right. Those marks on the cams are awfully faint and you just kind cross your fingers that 1st time you turn the key. Everything runs good and it even seems more peppy then before, prolly because the old belt was a bit stretched and thr...

OK, Lets just start that I planned on doing this timing belt change quickly and easily. I have changed belts numerous times on B230's. The belt I got at the local parts store...however...proved to be the wrong one :roll: . It was a gates T217 belt, but only had 144 teeth on it...not 148. I found thi...

ok..i seen what the codes mean on this site...but not what the "real" problem is. The codes of concern are:

A1) 1-3-4
A2) 2-3-1
A6) 2-4-1
A7) 1-2-2

Thanks for your Help

I replaced the struts, strut mounts and upper spring seats on my 850 the other day, but when you turn the wheel I get a squeak. How tight in the center mounting nut suppose to be? Should it be tightened with weight on the front or without? The squeak is just when turning to the right or left( i.e. l...