Does anyonce have picture or wiring diagram for wires that are from the back of engine. Just replace Cyc head. I have a harness that has 3 wires I have 2 of the 3 . Not sure if 3rd one was ever there. 1996 960.

I got around to testing after all of the rain I have a P304 code. I pulled offf igniton coil from number 4 cyc,.Still ran the same > I switched the ignition coil from 2 to 4 still ran the same. What could it be?

Ok until my daughter blew the head gasket

Is it a generic cat or one specific for the 960?Specific to 960 Same question for the O2 sensors= Bosch - Said Oem eq (generic) How is it running? Like it is skipping How do you know it was glowing? I was beet red in broad daylight Did it run a long time, less than 10 min was trying to make sure pre...

Just installed a Cylinder head on Volvo 1996 960,replaced O2 sensors,Catalytic converter red hot. What would be dumping fuel. Car also knocks.
Any hints on the ususal suspects?

Thanks Jimmy I found it , The second half of the coolant sensor was discconneted and the connetctor was missing. So I did not readily recognize it.
Every this is conneced and running. What a job.

Thanks for all of your help

I see two unattached wires near the alternator. Is the sensor near that?

Its up and running thanks. radiator fan keeps running. Not I need to see what is not connected

Thanks WoOr the engine turns over but will not fire up? ---It does this Two very different things, I will bet it cranks but is not firing, how is the timing? Set correctly - had help Are you sure the cams and crankshaft are on their correct marks? Yes If yes you are sure, then you need to confirm sp...

Finally got orginal head rebuilt and installed. Car wont crank its like it is missing plugs. Any hints on what to do?