Search found 114 matches
- 27 Dec 2013, 05:37
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: 1996 855R Heat issues
- Replies: 4
- Views: 1425
1996 855R Heat issues
So, I've been fighting with my heat/AC in my 1996 855R ever since I bought it. Luckily, I have gotten it to the point where I actually have HOT heat in the winter. Unfortunately, it's too hot and I can't turn it off. It's really starting to piss me off. It doesn't matter if I have the ECC set to the...
- 28 Jul 2013, 13:35
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: pressure pipe between fuel pump and filter
- Replies: 2
- Views: 578
pressure pipe between fuel pump and filter
Hey guys,
The rubber line from the fuel pump to the fuel filter is cracked and leaking fuel everywhere. I have a new one on the way in, but wanted to double check.... Do I need to drop the tank at all to fix this? I really really really hope not....
The rubber line from the fuel pump to the fuel filter is cracked and leaking fuel everywhere. I have a new one on the way in, but wanted to double check.... Do I need to drop the tank at all to fix this? I really really really hope not....
- 13 Apr 2013, 13:50
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: Pcv And Rubber Lines, Replacement Questions
- Replies: 4
- Views: 1215
Re: Pcv And Rubber Lines, Replacement Questions
Thanks for the help, guys. I ended up just buying 5/8 heater hose and 1/4 fuel line to use. Worked great!
- 13 Apr 2013, 09:31
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: Pcv And Rubber Lines, Replacement Questions
- Replies: 4
- Views: 1215
Pcv And Rubber Lines, Replacement Questions
So, I'm working on my 96 855R, and I have the intake manifold off so I can clean everything up pretty good. I have a bit of positive pressure, so I'm trying to make everything nice and tight and cleaned out. Anyway, I was wondering about these three lines.... The first one, I have no idea what it is...
- 21 Nov 2012, 06:54
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: Heat question, and windshield fog question
- Replies: 1
- Views: 596
Heat question, and windshield fog question
Hey guys, So, I have a 96 855R that is FINALLY at a solid stage 0+. I'm working on a bunch of minor issues, that are quickly becoming large issues now that winter's approaching. The first is the heat. So, I have fantastic heat, as long as I don't F with it. I have new radiator, lines, heater core, e...
- 26 Sep 2012, 12:54
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: what is this hose leading to? 850 Turbo 1996
- Replies: 3
- Views: 899
Re: what is this hose leading to? 850 Turbo 1996
It leads to the ECM, those two "computer things." All it does is cool them off. Repair it with electrical tape.
- 26 Sep 2012, 11:42
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: Looked at a 98 V70 T5M today. Issues inside
- Replies: 35
- Views: 5274
Re: Looked at a 98 V70 T5M today. Issues inside
Ooo. Yea, I'm in my mid twenties, so I still bend pretty good! 
- 26 Sep 2012, 11:41
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: 95' 850 mess of a couple months, save it from the scrapyard!
- Replies: 22
- Views: 3154
Re: 95' 850 mess of a couple months, save it from the scrapy
Fuel pump relay.
- 26 Sep 2012, 08:35
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: Looked at a 98 V70 T5M today. Issues inside
- Replies: 35
- Views: 5274
Re: Looked at a 98 V70 T5M today. Issues inside
The cam seal could leak the oil onto the exhaust, but most likely it's the PCV system if it hasn't been done in a while. Like said earlier. It pools up around the rear of the motor and then on a hard right turn, it flows over and the smoke begins to flow out the back for a few seconds. Speaking fro...
- 26 Sep 2012, 05:53
- Forum: 850, S70, V70, C70, V70-XC 1992-2000
- Topic: Crazy knocking noise from serpentine belt area, power steeri
- Replies: 5
- Views: 1903
Re: Crazy knocking noise from serpentine belt area, power st
Well, that post was seven hours ago, but I bet he didn't make it even 30 minutes before it just destroyed the pulley and did a dismount on the belt... but can you just cut the belt on these cars and muscle it along?...I never have tried to drive a Rack and Pinion that way, I have done old recircula...






