I bought a heavy duty rivet tool from Harbor Freight. It came with several tips and an assortment of rivets.

Under the driver side cover

Here is the drivers side connectors. Also, I have the plastic tank and looked all around the edges and did not find anything sticking out enough to pull or wiggle.

It does not seem to match the illustration from VIDA instructions because there is no big cable plug.

I went looking today, took out the back seat and attached are pictures of what I found
D

Mike,
I will check the voltage and see what it reads.
Oragex, thanks for the photos.
Lee

I have a no fuel condition on my car and I am trying to locate the fuel pump control module (also known as Pump Electronics Module). It is not in the spare tire wheel well. I have seen the illustrations and VIDA instructions that show it at the front of the tank, near the fuel filter. However it is ...

Once you decied what you want/need, try searching at www.car-part.com. It is a website for auto salvage yards. You can search for exactly what you need. You are buying from individual salvage yards and they will ship. I bought a 1999.5 auto trans with 50k miles for our Nissan Pathfinder which is wor...

I know that when I did the belt, i did not take off the end cap or cam positioner sensor cover, so I really don't know if the end of cam marks ligned up. Also, I did not turn the cvvt mechanism all the way CW. I did not turn it at all. Do I need to loosen it prior to turning it? I did unplug the cvv...

It is not too hard. I recently did a change out on my 2002 V70XC. I actually found a good used turbo in a locat U-pull-it for about $40. The biggie is look for shaft play in the axial (in-out) direction. If there is not much play, then you should be good. Also, plan on replacing the turbo to exhauts...