Does anyone have any idea what the maximum resistance should be for spark plug wires? I am considering changing them. Car is a 2000 with 205K miles. Probably need them changed but just want to validate that they indeed need changing for a reason other than age. Currently they are original but still ...

I have 2 documents (Part 1 & 2) that the provide excellent detail on how to replace the rear struts on 2000 S40. Hope they help you guys.

I have 2 documents that make up an excellent depiction of how to replace the rear struts on an S40. Problem is that both documents total almost 3 megabites.

How can I provide access to other members?

Uhlan

I have 2 documents that make up an excellent depiction of how to replace the rear struts on an S40. Problem is that both documents total almost 3 megabites.

How can I provide access to other members?

Yes. Springs are compressed and not in the way at all at this point. Even if I try to thread the nut onto threads without the spring on the strut, I still don't get enough thread showing through the rubber washer/groument to be able to even hand thread the nut on to get it started. I think I must be...

I am in a rather serious predicament here. Hope someone can help. Have removed both rear strut assemblies, and successfully taken the coils/springs off. Problem now is getting it back together. Issue is that when assembled, I can’t compress the rubber washer that sits on top of the top strut enough ...

I am about to replace the rear shocks and coils on my car.Apparently one of the first things that I need to do is to address the anti-roll stabalizer bar. While the car is on the ground prior to raising the rear end.. Am I supposed remove the 4 bolts hold the 2 stablizer mounting brackets to the fra...

a very belated thanks

Gentlemen - I need to change the Anti-Roll Bar connecting Link on my 2000 S40. When I looked at the 2 nuts securing the link, I see that each nut seems to have something like a ring type threaded locking device attached to the top of the nut. Do I need to unscrew that prior to taking off the bolt? O...

Bolts worked like charm. Thanks for the advice. My S40 is back in action with new from rotors.