I have taken the shaft out of my 2011 xc70. Yes it can be done without exhaust removal. Remove driveshaft cv bolts front and rear with a 8mm hex socket, a universal and extensions. I then unbolted the carrier mounts from the car. I started with the rear and then did the front carrier mount. Exhaust ...

I have a 2011 XC70 AWD that had a vibration in the driveshaft (propeller shaft) . I removed the shaft and it had a bad carrier bearing and possible bad rear cv joint. The shaft is built so that the carrier bearing cannot be removed. If a shop could to this work is the bearing available separately? V...

Hi I just removed the right cv axel to replace the carrier bearing. The shaft that was in the transmission was dry and had no lube and was rusty in spots. Before install should I apply any type of grease or lube on the transmission side splines and the shaft seal? There is no transmission fluid in t...

Does anyone know if these vvt units are suppose to move? Need help. Engine won't start.

2012 s60 with t5 engine. I have removed the vvt from the camshafts. I have the cam locking tool. The VVT units do not move by hand on the shaft. Is this correct ? Older versions were spring loaded. Do I just line up the timing marks on the cover? Seems too easy and I'm pretty sure that is what vida ...

Just and update. The timing marks were there just really hard to see.

Need help finding timing marks on camshafts. 2012 s60 I want to verify my timing and don't see timing marks on the camshaft gears. Any help would be greatly appreciated. Thanks Mike

I want to remove fuel from a 2012 s60. The relay setup in the same as the xc70. I want to hook up a hose to the fuel rail hose and pump it out. How to I start the pump? Any help would be greatly appreciated. Thanks Mike

get vida software, really inexpensive on ebay, pia to install but is a great reference on many models. Make sure you also get the wiring diagrams disks too.

get vida software, really inexpensive on ebay, pia to install but is a great reference on many models. Make sure you also get the wiring diagrams disks too.