Thanks Ozark Lee
Looking thru the diagrams you are correct
Regards
Rob

Hi Guys
Im trouble shooting a no start on my T5R
Running thru the OBD codes I don't seem to have socket A6 ( Ignition system ) installed in the receptacle

Also when i plug in the lead to A2 the LED illuminates slightly Im looking for a short or a pinched wire

But none seem 850 OBD socket.jpg ...

Thanks Azik09 Attached are photos of the hardware
Ive checked the cables from the ecu to the camshaft sensor , there is good continuity and no voltage drop

Even with a spare ecu installed i still get just over 2 volts at pin 3 on the sensor plug and less than half a volt on pin 2

850 ecu.jpg ...

Hi Guys
Im just finishing off an engine swap on my T5R
Went to fire up this morning and No Spark
Have traced the fault to a 2 volt input to the cam angle sensor , by all accounts this should be around battery voltage
Swapping out the ECU has not changed the issue
Can anybody give me a lead as ...

I need a set of cams for an engine build I'm doing down in New Zealand
Can't find any good cams down here
I've got a US shipping address and can pay thru Pay Pal
Would appreciate any help or recommendations