Ok guys this car is making me go crazy I have the car up and running so I have cleared all the code that perceive owner had. And now it's giving me a TPS code but the car is running fine. I was reading a TSB that says that anytime you clear the code of a TPS or disconnect the battery, that you would...

Hi precopster thanks for all the help, I just did what you told me and the window did not work. I have a code of E003 needs configuration and the same thing for the seat. My scanner is a Pegisys it will look up all codes and erase them but it will not allow me to program, that's why I wanted to know...

Hi precopster, ok I was able to find my problem with the window and the seat. I have cleared all the codes with my scanner but now I need to relearn or update the used pass side window switch. This is so crazy if the window switch does not work it will not let the driver seat and the sun roof work. ...

Hi, precopster I just came to work I tried the driver switch to see if the pass side mirror work, no it does not. I replaced the pass side switch from a used junk yard not the driver. Let me ask you this can I take the driver and pass switch and the ECM off the 2002 s80 that I now it's working and t...

Hi precopter this what I have a 2000 s80 and a 2001s80 for parts, and yes you are right I took the seat from the 2000 and it work fine on the 2001. As for the pass side window I bought used on and pluged it in and no it didn't work. Now my question would be what would I have to transform from the 20...

Hi thank you for the quick reply, as for the window I did find the ribing wire connection broken on the big board. As for the seat yes when I disconnect the battery and reconnect it does work but not for long. The wire white and green is the module wire is this where my problem could be? And you sai...

Hi does the Vidal scan tool allows me to reprogram modules in my Volvo s80 ? Please let me know thanks

Hi,
I have a 2000 s80 and the driver seat will work then it not work if I disconnect the batter it will work agin but not for long. The pass front will does not work I by pass the wire and I can make it go up and go down so the motor is working. Please let me know if I need to program this? Thanks