I thought I saw photos of the location of this sensor on this site . I keep searching but can not find them again . I have a new sensor - Bosch # 0280130032 (1346030) with blade type connectors . The sensor I found on the head has round connectors . Am I looking at the wrong sensor on the engine ? I...

Do you really need parts ? My 91 seat was not working when I bought the car . I sprayed electrical contact cleaner in the controls and tapped the housing . I do this every 3 months and the seat works fine . Deoxit works best ,dont know about parts.

" load signal from fuel injection system absent " What does that mean ?

My SRS light has been on for months . Could this have shut down my fuel system ?

New relay , fuses good , pulled fuel pump from tank and connected it to the battery . Fuel pump runs . No power from wire harness that connects to the pump . Starts for a second then dies . I am at a loss .

Engine stalled . Restarted and ran about 3 miles . Stalled . Cranks and starts for about 2 seconds . No fuel flow with line disconnected from fuel rail . Do not hear pumps running . New pump relay , fuses good . Fuel code light glows red . Ignition code 1-4-4 = no load at FI . ?? Thanks for any info .

I have a 91 940 Turbo Wgn . Need a new power antenna . ???

I shoot contact cleaner / lubricant into the switches then keep activating them . That usually gets them working for awhile .

I had a similar problem...turned out to be a worn out hose..the big intake hose had rubbed against the turbo and gotten soft .The car ran fine at slow speed or part throttle but when I floored the pedal the soft hose would colapse and the car would not accelerate .