Hello All, I'm replacing the rear main seal on a '96 850 T5, and I'm stuck with one thing. To clarify, I installed a Corteco RMS, which has a rubber lip with a spring around on the engine side, and a layer of felt on the transmission side. The inner diameter of this felt layer is smaller than the ru...

Hello, Thank you for the advice. I inspected the hoses visually, and on suspected locations I tried the carb cleaner method. Unfortunately I couldn't find any shop doing leak test here. By the way I checked some videos on youtube and I'll try to do a smoke test myself with a homemade "smoke mac...

Hi all, I know that there are already topics with this issue, but I'm starting to go crazy as nothing seems to fix this. Here's the situation: my 850 T5 has issues with starting, after engine reached operating temperature. It cranks, but it will fire up only after like 15-20 seconds of cranking (on ...

Hello All, My problem starts to be a little confusing, and I don't really know where to proceed. At idle when I checked Crankcase ventilation, I noticed that smoke is coming out of the oil filler cap. I removed the clamp holding the black hose (that goes to the PCV breather box from the top of the e...

Okay, thank you very much!! You help me a lot. Let me know if I can have it

Hello, I know these two pieces are just small details, but i would like to have them :) First, I'm looking for a radio knob for a SC-811 unit. One of the two roundish knobs was lost over the years, and now I would like to find one to replace it. http://images.sc1.netdna-cdn.com/D/Factory-Stereo-R-22...

I just made that last week. I had two broken fog lamps ( one exactly like yours, on the other just the glass part was broken), so I decided to pull it apart and try to make one good. First of all you should try this: place back the weather seal, then the metal casing for the bulb. Note that the meta...

I'm not sure, but I guess it's for the airmix function

Thank you, I thought if there were a short circuit or a fault in the electrical system, it would have turn the light on. Now I have no idea what it could be

I've been running for years with ABS and TRACS light on, it was a bad module. Yesterday I replaced it with a repaired one, I cleared the codes and it works fine, I tested it, but since then there is some kind of burning smell coming from the ABS unit location while driving, and even when I stop at a...