I will check that out. Thanks!abscate wrote: 05 Dec 2021, 15:24 Go the FCP Euro site and put in your car details , then search for throttle body
I’m pretty sure your 2006 uses a Bosch electronic Throttle actuator which does not require programming
Search found 16 matches
- 05 Dec 2021, 15:46
- Forum: S60, V70, V70-XC 2001-07
- Topic: Programming required after installing an ETM for a 2006 S60 turbo?
- Replies: 10
- Views: 1540
Re: Programming required after installing an ETM for a 2006 S60 turbo?
- 05 Dec 2021, 15:45
- Forum: S60, V70, V70-XC 2001-07
- Topic: Programming required after installing an ETM for a 2006 S60 turbo?
- Replies: 10
- Views: 1540
Re: Programming required after installing an ETM for a 2006 S60 turbo?
Clear the codes and see what comes back.
Any of the above ECM-XXXX error codes can be caused by:
1. The throttle sticking or is blocked (e. g. oil film, dust)
2. Contact resistance or oxidation in the terminals between the engine control module (ECM) and the electronic throttle unit.
3. Open ...
- 05 Dec 2021, 14:56
- Forum: S60, V70, V70-XC 2001-07
- Topic: Programming required after installing an ETM for a 2006 S60 turbo?
- Replies: 10
- Views: 1540
Programming required after installing an ETM for a 2006 S60 turbo?
Hi, I have a 2006 S60 turbo that won't idle properly, and I'm getting a group of error codes about the ETM. My question is does anyone know what I would need to do after buying a new one? I'm curious because the prices quoted to me vary greatly between what Auto Zone said a throttle body costs ...
- 08 May 2019, 14:03
- Forum: S60, V70, V70-XC 2001-07
- Topic: 2004 V70 unsynchronized locks
- Replies: 6
- Views: 859
Re: 2004 V70 unsynchronized locks
I don't know how those wires got switched initially, but I switched them back, and it fixed it. Thanks again.
- 07 May 2019, 19:45
- Forum: S60, V70, V70-XC 2001-07
- Topic: 2004 V70 unsynchronized locks
- Replies: 6
- Views: 859
Re: 2004 V70 unsynchronized locks
Thank you. I'll see if I can sort them out somehow.
- 07 May 2019, 18:07
- Forum: S60, V70, V70-XC 2001-07
- Topic: 2004 V70 unsynchronized locks
- Replies: 6
- Views: 859
Re: 2004 V70 unsynchronized locks
I didn't see a green wire in the harness running to the actuator. There were two yellows, a gray and a pink. It looked like inside the actuator there was a green wire. Overall it didn't look like anything had been disturbed as far as the wiring harnesses.
- 07 May 2019, 17:57
- Forum: S60, V70, V70-XC 2001-07
- Topic: 2004 V70 unsynchronized locks
- Replies: 6
- Views: 859
Re: 2004 V70 unsynchronized locks
I'm not sure, but I'll check.
- 07 May 2019, 15:43
- Forum: S60, V70, V70-XC 2001-07
- Topic: 2004 V70 unsynchronized locks
- Replies: 6
- Views: 859
2004 V70 unsynchronized locks
Hi. I have a 2004 V70 that was recently in a crash that caused it to have to have its trunk lid replaced. The trunk lids were swapped, and everything fits fine, but the car's locks are out of sync. When I lock the car's four doors, the trunk lid unlocks. When I unlock the trunk lid, I lock the car's ...
- 04 May 2018, 19:56
- Forum: C30, C70 2006+, S40 & V50 2004 ½ +
- Topic: 2011 C30 seat compatibility with an S40 or V50?
- Replies: 1
- Views: 1540
2011 C30 seat compatibility with an S40 or V50?
Does anyone know if you can use S40 seats in a C30? I have a C30, and its previous owner wore a hole the driver's seat and the arm rest on the console. I know I can get a replacement for the arm rest from an S40 or V50 if I can find one, but I'm not sure about the seat.
Thanks in advance.
Thanks in advance.
- 04 May 2018, 19:52
- Forum: C30, C70 2006+, S40 & V50 2004 ½ +
- Topic: 2011 C30 product plate/paint code location?
- Replies: 9
- Views: 7577
Re: 2011 C30 product plate/paint code location?
I see. Thanks.RickHaleParker wrote: 26 Mar 2018, 13:06 QW90 and PIE are external databases. Unless you pay you out of the nose, you don't have access.






