Shipping out the CEM for scan and possible repair. I will update this thread with progress for reference.

I need to get my CEM repaired and am looking for feedback on using BBA in Massachusetts or XeMODex in Canada. Pricing-wise, BBA is pretty hard to beat (quoted $250 for a repair unit with lifetime warranty) versus xeomdex ($600 for the same item). I've read some mixed things on yelp and google review...

Just swapped out the battery from our VR for a test. Before that, I put 2, new 30-amp fuses in 14 and 19 (both ABS) under the hood to see if they may be bad. reconnected battery. buzzing noise is immediate, still with no key. I put my hand on the ABS pump motor and could feel it vibrating. After con...

Hard to say what it is. When the noise appears if you place your hand on the ABS pump does it vibrate? It could be the brake booster motor just near the air cleaner (underneath) Also if you pull fuse 19 does the buzzing stop? If I pull Fuse 19, the buzzing does stop; however, I can't seem to get th...

Not cool at all...Don't let it melt and freeze, then it will really be hard to get out of there.

here is a link to the buzzing sound. Thoughts? Maybe I'll swap out batteries from our VR and see if that does anything.

I'm still getting the BCM-0070 DTC.

https://youtu.be/8YZoRXb8QGs

I have pulled Fuse 19 (labeled ABS) in the engine bay and the buzzing noise stops from around the ABS pump area. I checked that one and Fuse 14 (also in engine bay and labeled ABS) and they both appear to be fine. I am still getting a bunch of DTCs. The noise in the ABS area gets louder when the das...

Try and reboot the computer? Sometimes I have seen that just a refresh of the browser will be sufficient.

Ok, well, I have no idea what is going on with the car. installed a used ABS pump motor and kept the xemodex BCM installed. got everything hooked back up, then got just a few codes (listed below). As soon as I hook up the battery, the ABS unit starting buzzing, which is the same thing it was doing b...

I just spoke with a tech at xemodex and he said the same thing; it's a dust seal and should be OK to reinstall it and tighten it down. I was worried it had fluid moving around in it.