one more note on the 1997 960 vacuum system for the blend doors and the ECC. I thought I would add this bit, the line that I plugged only operates the interior temp sensor in the dash near the windshield. see the link diagram the other line operates the blend doors, I thought it operated the pass si...

But to continue the saga of searching down Ecc vacuum blend doors issue with a 1997 960 v90. I found like others here the best place to start is to test the vacuum lines, testing from the outer fire wall. near the Ac accumulator. this is the process I used. 1. locate the three vacuum lines going int...

This is what I did and it Has worked out very well with a stock look, plus no sag. (and only cost me $120.00) (copied from my post on the rear suspension rebuild I did on my 1997 960 Multi link) "I never like the shock solution that Volvo came up with on the system, so I used a Monroe Shock Loa...

Ok just for prosperity sake, I'll try to finish the thread on this. First off taking on the rear suspension of a 1997 960 multi link suspension of this is not to difficult, unless your wanting to completely rebuild the whole rear suspension, and take out the rear differential. With that said I of co...

Thread revived Ok Its done! Yep after three years sitting and collecting parts I have completely rebuilt the Multi link rear suspension. I had many other projects ahead of this one. But, it is now complete and I have many pictures and part numbers to share. If any one is attempting to rebuild a 1997...

Ok Let me update I have the whole system out and will post a play by play on this process when done. I did find a Part Number: 9140471. Which I was led to believe was the stiffer of the transverse springs. With non nivomate in a wagon. The one in the car, I have reads the same and was stamped code 1...

Ok Let me update. I have the whole system out and will post a play by play on this process when done. I did find a Part Number: 9140471. Which I was led to believe was the stiffer of the transverse springs. With non nivomate in a wagon. The one in the car, I have reads the same and was stamped code ...

Ok thanks,... After looking fast, on the car parts list, most have already been crushed. Its a disposable society we live in. Looks like I’ll be taking it all out and rebuilding the rear suspension. (or junking it my self,) kind of a shame to do that. Part number on the spring is stamped as 9140471

Ok I will let you know the update as I get it sorted out. Took it out of storage today to get started on this , such a niceand so under-rated car. . thanks

So what is the best way to find one, looks like all sources are NLA.?