I was getting ready to remove everything from there and disassemble the whole unit by starting with removing the glass, but I decided to wait because I think the issue might be the weather stripping around the window itself because there was a point where it would stop going up straight as it should...

Not a bad idea, it's a bit of work, but could work very well. I'm going to check with the stealership in case they somehow have them cheap or something, but otherwise I'll probably end up leaving it as is, because sand blasting it doesn't sound like too much fun. Sanding, priming, spray painting, et...

I've tried removing the metal plate and so I started by removing all the screws. Now I'm stuck with trying to pull it off, but it feels like it's still attached to something. Here a picture of the previous one with a circle around where it feels stuck, and do note that there are no directly visible ...

I've been searching around for this molding and am having trouble finding it. I found a website that carries exterior molding but they didn't have this one listed or identified in the pictures. Over the past 11 or 12 years that we've had the car, it's worn out, and you can see the metal it covers. I...

I took the panel off and am a bit confused, here are some pictures: Panel Removed http://img386.imageshack.us/img386/1310/40123089yv7.th.jpg Motor & door handle Removed http://img474.imageshack.us/img474/4655/93292594jm8.th.jpg I'm a bit confused what to do next, because I'm not sure what's behi...

Ok, will do. Just for documentation purposes in case someone else finds this and has the same issue, I'm following this guide: https://www.matthewsvolvosite.com/chat/p ... hp?t=11338

The passenger door's window does not move up and down along the path it should, and so someone has to push it back into place every few inches to help it move along. It can go down just fine, but not back up. I've done quite a bit of searching, found guides on how to remove the panel and such, but h...