engine timming on a 1990 740
engine timming on a 1990 740
is it possible to be 180 off engine timming when replacing a timming belt?...it won't start..is the r p m sencor picking up the right signal? any suggestions?...Mike
-
JDS60R
- MVS Moderator
- Posts: 3532
- Joined: 21 February 2009
- Year and Model: 2007 S60R 2016 XC70
- Location: Mount Juliet, TN
- Been thanked: 3 times
Nope,
The cam turns at 1/2 spped of the crank. So the crank is in the right spot twice for each revolution of the cams. If you had the crank timing marks and the cam marks correct when you put on the belt then you will be fine inthe cam timing department.
The cam turns at 1/2 spped of the crank. So the crank is in the right spot twice for each revolution of the cams. If you had the crank timing marks and the cam marks correct when you put on the belt then you will be fine inthe cam timing department.
Retired
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8 Replies
- 2002 Views
-
Last post by beoutside
-
- 0 Replies
- 500 Views
-
Last post by traderjoe777