The vertical adjustment dials for my headlight don't seem to do anything at all, and at the moment my headlights are basically pointing at the front bumper. Does anyone have any experience with either fixing the adjustment controls (assuming the gears aren't stripped or broken), or finding some other way of setting the headlights in place? A friend of mine likes the idea of drilling long machine screws through the housings to set them in place. I don't like that idea so much.
thanks
Headlight adjustment without gears?
-
kiddynamite
- Posts: 20
- Joined: 14 December 2008
- Year and Model:
- Location: Austin, TX
-
vjaneczko
- Posts: 1550
- Joined: 27 March 2006
- Year and Model: 2006 S60R
- Location: San Antonio, TX
- Been thanked: 6 times
What kind of ride do you have?
Did you just install new bulbs? Sometimes I have a hard time getting the bulb properly mounted in their base and that would cause the bulbs to be a bit cock-eyed.
Have you reviewed these:
https://www.matthewsvolvosite.com/forums ... 14&start=0
https://www.matthewsvolvosite.com/forums ... 62&start=0
I'd also make sure that the assembly is seated and attached to the car body properly.
Did you just install new bulbs? Sometimes I have a hard time getting the bulb properly mounted in their base and that would cause the bulbs to be a bit cock-eyed.
Have you reviewed these:
https://www.matthewsvolvosite.com/forums ... 14&start=0
https://www.matthewsvolvosite.com/forums ... 62&start=0
I'd also make sure that the assembly is seated and attached to the car body properly.
"He attacked everything in life with a mix of extraordinary genius and naive incompetence, and it was often difficult to tell which was which." - Douglas Adams
1997 855 GLT - R.I.P.
2006 S60R - For ME!
1997 855 GLT - R.I.P.
2006 S60R - For ME!
-
- Similar Topics
- Replies
- Views
- Last post