Manual transmission help

love2xlr8 · Post by **love2xlr8** » 28 Aug 2005, 21:44

hi

i would like to know if someone ever replaced a clutch from a 1994 850 turbo manual. how hard is it and if there is any steps i should take.

it would be also appreciated to get some info about the clutch. someone told me the volvo clutch is assembled with rivets with the pressure plate and fly wheel, is that true?

thank you

dpauto.com · Post by **dpauto.com** » 29 Aug 2005, 11:45

850 clutch assembly (kit) comes with 3 SEPARATE components, throwout bearing, pressure plate, and clutch disk. Flywheel should be resurfaced. Don't forget to replace the engine rear main seal while trans. is out. The job is not easy if you don't have a lift and special tools to hold the engine in place. Lets put it this way, it is not a job for an average Joe.

Regards,
Dave

Guest · Post by **Guest** » 29 Aug 2005, 15:11

what the rear main seal seals? coolant?

thanks for the help btw

dpauto.com · Post by **dpauto.com** » 29 Aug 2005, 16:00

Anonymous wrote:what the rear main seal seals? coolant?

thanks for the help btw

Rear main seal = rear crankshaft seal

Regards,
Dave