s701998 po172 119,000

Retired MVS Contributor · Post by **Retired MVS Contributor** » 15 Oct 2010, 14:33

po172 cross references to ECM-0162 in PPC= "Injector=cyl 1"

Retired MVS Contributor · Post by **Retired MVS Contributor** » 15 Oct 2010, 14:50

jerrymcc wrote:po172 cross references to ECM-0162 in PPC= "Injector=cyl 1"

A further check on BSR's website says "injector cyl 1, sig too high"...A wild guess of a signal that is too high is that it is an open circuit, therefore no voltage drop present...

tmower · Post by **tmower** » 30 Oct 2010, 10:42

What does this mean?
Mechanic says he checked all the vacuum lines, including one near manifold. He still doesn't know what is the cause of the code.
Could it be a computer glitch?

tmower · Post by **tmower** » 03 Dec 2010, 14:26

I might add that when the heater and/or defroster is on, I can detect a gasoline or oil smell. Is this related to the fuel injector ?
Thank you for your valuable input.

Post by **jblackburn** » 03 Dec 2010, 15:25

Is this a turbo model? I know that smell, and it's from oil leaking on the turbo/exhaust manifold from mine from a clogged PCV system/bad oil cap seal.

Lift out the oil dipstick while the engine is running (and warmed up) and see if there is smoke puffing out of the opening.

tmower · Post by **tmower** » 04 Dec 2010, 09:34

Will do...will be back in touch soon! Thanks.

s701998 po172 119,000

Re: s701998 po172 119,000