Cleaning Engine BLock

guest · Post by **guest** » 28 Nov 2005, 15:04

On the top of my engine it looks to be corroding and I'm not sure how to clean it, any tips?

White850Turbo · Post by **White850Turbo** » 29 Nov 2005, 07:31

It shouldn't really be corroding; probably just oxidizing. The solution will take a lot of time and elbow grease. You can just sand the valve cover, starting with 100 grit and continually going up to about 1200 grit; higher if you want a more polished look. This will take several hours.