strut bar bushing

Volvos rock3 · Post by **Volvos rock3** » 02 Apr 2011, 12:44

The one behind the top motor mount, that the two metal braces from the top motor mount attatch to. Any source for these? I replaced the top motor mount with the IPD poly, the tourque mount and the right side one with hutchinson, but did not see a replacement for this bushing anywhere? It seems to be a weak link. 02 V70XC 115K. Thanks

Post by **precopster** » 02 Apr 2011, 18:17

Is this what you're after?:

http://www.fcpgroton.com/product-exec/p ... ory_id/109

OR

http://www.fcpgroton.com/product-exec/p ... ory_id/109

Volvos rock3 · Post by **Volvos rock3** » 03 Apr 2011, 01:35

Thanks, but no. I have replaced these to, at the same time as the rest. The top engine mount, the one that IPD makes the poly replacement for, connects to the strut bar by the two metal braces that go back towards the fire wall and bolts to the bottom of the strut bar. Where that bolt goes through the strut bar "bracket" there is a rubber bushing that seems like it has alot of play in it, but is not torn like the engine mount was. Just trying to figure if that bushing is replacable and if so, where to get it.