stalling when first started
-
pbrownbigboy
- Posts: 3
- Joined: 31 October 2011
- Year and Model: s40 2000
- Location: england
stalling when first started
i have a s40 2000 and stalls constantly when first started,seems only when choce is on,once warmed up runs just fine,no codes showing,cleaned idle control,replaced idle control,very frustrating,cheers pete
What about spark plugs? Are they gapped properly? If not, they might ruin your coil packs. Spark plug wires could be bad too.
2003 V40 T4, silicone vacuum hoses, K&N air filter, iPd Boost Gauge, iPd HD TCV, PowerSlot Rotors
-
pbrownbigboy
- Posts: 3
- Joined: 31 October 2011
- Year and Model: s40 2000
- Location: england
had the plugs checked,and new plug wires also,cheers
- billofdurham
- MVS Moderator
- Posts: 6507
- Joined: 2 February 2006
- Year and Model: 855, 1995
- Location: Durham, England
- Been thanked: 5 times
Some more things to check:
Throttle switch and connection.
Coolant temperature sensor and connection.
Intake system for air leaks.
Engine speed sensor.
Bill.
Throttle switch and connection.
Coolant temperature sensor and connection.
Intake system for air leaks.
Engine speed sensor.
Bill.
Work was good - retirement is better.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
1996 850GLT 2.5 20v Estate Manual.
1995 Peugeot Boxer 2.5Tdi Autosleeper.
Previously:
1984 244DL, Manual, Beige.
1987 744GLE, Manual, Green.
1991 960 3.0 24v, Auto, Silver.
1994 940T Wentworth, Auto, Blue.
-
pbrownbigboy
- Posts: 3
- Joined: 31 October 2011
- Year and Model: s40 2000
- Location: england
cheers bill
-
- Similar Topics
- Replies
- Views
- Last post
-
- 16 Replies
- 2790 Views
-
Last post by Sommerfeldt
-
- 4 Replies
- 1462 Views
-
Last post by j-dawg






