I'm getting a flashing arrow and OD will not engage. It shifts smoothly through all the gears. I pull codes and get emissions codes and generic misfire codes (P0300, P0303 etc...) that I believe are unrelated. I get no transmission codes. Occasionally it'll rev real high in 2nd then finally shift into 3rd but that's intermittent.
However, when I reset the codes, the XC will shift in to OD and all is fantastic. I'm thinking PNP but I've raked the gear selector many times to no avail. Solenoid, perhaps?
It's been a good seven year trip with this XC. After a turbo, radiator, fuel pump, some tune ups, four kids and 75k miles I've put on myself, I'm not ready to give up on her... no matter what my wife says.
BTW, what ever happened to MIJ?
Flashing arrow w/ no OD
This topic is in the MVS Volvo Repair Database »
P2 V70 & S60 headlight fix
-
jblackburn
- MVS Moderator
- Posts: 14043
- Joined: 8 June 2008
- Year and Model: 1998 S70 T5
- Location: Alexandria, VA
- Has thanked: 9 times
- Been thanked: 19 times
You will not find transmission codes on a Volvo with a standard OBDII tool. They're proprietary and can only be read by a special Volvo tool or software.
How's the fluid look? Sounds like a solenoid or line pressure problem causing the transmission to think the solenoid isn't capable of making the last shift.
How's the fluid look? Sounds like a solenoid or line pressure problem causing the transmission to think the solenoid isn't capable of making the last shift.
'98 S70 T5
2016 Chevy Cruze Premier
A learning experience is one of those things that says, "You know that thing you just did? Don't do that."
mercuic: Long live the tractor motor!
2016 Chevy Cruze Premier
A learning experience is one of those things that says, "You know that thing you just did? Don't do that."
mercuic: Long live the tractor motor!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 12 Replies
- 3022 Views
-
Last post by abscate
-
- 1 Replies
- 563 Views
-
Last post by precopster






