please help with timing issue..... i think im crazy
Re: please timing issue..... i think im crazy
Great i will give it a try today and let you know. thanks so much for your help.
Ok I set the crank and the back of the cams rotated the gears as far clockwise as I could, put the belt on and still no good. No interference but will not start and cranks over like its still out of time. Any suggestions?
-
boosted5cyl
- Posts: 1100
- Joined: 29 January 2010
- Year and Model: '98 V70 T5, '99 S80
- Location: St. Paul, MN
- Been thanked: 1 time
You might need to loosen the three bolts on the vvt pulley. With the gear marks lined up the VVT pulley on the inside should be rotated fully clockwise. Once you've done that, lock up the three small bolts on the pulley.
'04 XC90 2.5T AWD (Angus) 134K.
'99 S80 T6 (Medusa) 214k. On borrowed time LOL
'98 V70 T5 (Vivienne). RIP @ 228K. Spun rod bearings.
'99 S80 T6 (Medusa) 214k. On borrowed time LOL
'98 V70 T5 (Vivienne). RIP @ 228K. Spun rod bearings.
-
- Similar Topics
- Replies
- Views
- Last post






