240 won't crank

arbop · Post by **arbop** » 29 Oct 2012, 03:01

Very recent new battery and alternator, and my 240 won't crank. Everything, (connections, grounds), looks good, but after getting gas one day, the car wouldn't start. Before I start to remove/replace the starter, what other items should I check? I seem to recall a relay for the starting system, and a fusible link, can anyone tell me where they may be, and how to check them? Thank you in advance

Post by **billofdurham** » 29 Oct 2012, 12:42

As far as I'm aware there is no relay nor a fusible link in the starter circuit.

There are two checks you can run before pulling the starter motor:

240 starter does not crank engine.pdf: (136.19 KiB) Downloaded 134 times

240 testing starter solenoid.pdf: (108.78 KiB) Downloaded 103 times

The first test also applies to the 1992 model. The second test is usually done with the starter on the bench but I have done it with the starter still in the car.

Bill.