Rear Cam Seal Leaking Out of Cam Sensor Housing

TLaFeve71 · Post by **TLaFeve71** » 11 Nov 2012, 05:02

I have a 2000 S40 1.9T with an oil leak from the cam seal inside the cam sensor housing. Can I replace the seal by simply taking the cam sensor housing and cam sensor ring off the cam and pulling the seal out or do I need to remove the valve cover to get to it? I am trying to avoid pulling the timing belt since it and the front seals were done by the previous owner not long ago.

Thanks for any help you can give me!

Post by **Pauloil** » 11 Nov 2012, 05:51

yep. there are how to dos over in the 850 forum

TLaFeve71 · Post by **TLaFeve71** » 11 Nov 2012, 06:54

Found it! Thanks for the help!