Passenger side motor mount and harmonic balancer torque

Jgarrett354 · Post by **Jgarrett354** » 07 Feb 2013, 19:34

I have a 04 XC90. I am fixing to try and change the passenger side motor mount which is broke. After looking at it it looks like I am going to have to take the crank pulley off to do this? If I do can anyone tell me what the torque specifications are for putting the pulley back on or does anyone know any tricks to getting the mount changed without taking the belt and pulley off??? Thanks in advance!!

Post by **boosted5cyl** » 08 Feb 2013, 07:43

What motor?

Jgarrett354 · Post by **Jgarrett354** » 08 Feb 2013, 08:47

Post by **boosted5cyl** » 08 Feb 2013, 12:23

Ill try and get the torque values for your tonight.
Come to think of it, and im going from memory here, so bear with me but I dont think the center nut needs to come off. Just the 4 outer ones, that lets you removes the big black disk (dampener) thats in front of the mount.

Jgarrett354 · Post by **Jgarrett354** » 08 Feb 2013, 13:16

That is right once I removed the four little ones the balancer came off! Thanks.

Post by **regent** » 08 Feb 2013, 15:25

Check these out (from VIDA).
Thanks