Power driver seat not working 1995 960

1FastCookie · Post by **1FastCookie** » 24 Mar 2013, 18:34

Yay OBD light fixed today! (Thanks to BillofDurham) Now on to the seat calibration....

1FastCookie · Post by **1FastCookie** » 04 Apr 2013, 19:07

Ok, I've read the calibration paperwork many times, How do you inout? It says to input 4 first.
Note! DTM 4 before each code. (i.e. press
button 4 times before entering each code).
But each code starts with 4.. How do you input? By pshing the button like morse code?
4–2–3 Enables calibration... 4 presses wait 2 presses wait 3 presses??

Am I making this more difficult than it really is?

1FastCookie · Post by **1FastCookie** » 10 Apr 2013, 20:28

Anyone done this procedure?

wildbill96 · Post by **wildbill96** » 28 Sep 2013, 18:37

Golly! Who would have guessed that the darn drivers seat is wired to something under the hood!

Thank you for this thread!
This is my 1st visit to Mathews. Heard about this quite by accident . .

We have a '98 S90. One of the motors of the drivers seat stopped working. About 4 years ago I went to a junk yard to get a nice replacement. It has done well but now one of the motors is intermittent. -- AND it is the same motor as with the original seat! I am guessing that the problem isn't the seat at all. Don't know what to do other than take the Calibrate PDF printout and take to my good repair guy and see if he can do something . .. thanks // bill

Power driver seat not working 1995 960

Re: Power driver seat not working 1995 960