Etm
Etm
Ok guys this car is making me go crazy I have the car up and running so I have cleared all the code that perceive owner had. And now it's giving me a TPS code but the car is running fine. I was reading a TSB that says that anytime you clear the code of a TPS or disconnect the battery, that you would have to have the TPS reprogrammed. Please does anyone know about this thanks.
I would personally try to disconnect the battery.
Position the key in II and disconnect it. That is correct way.
Although when I replaced my battery (the old one just died) I didn't position my key in II position. Had to reset the time on the dashboard but no reprogramming.
I have 2001 S80 2.4T 147 KWT gasoline.
Position the key in II and disconnect it. That is correct way.
Although when I replaced my battery (the old one just died) I didn't position my key in II position. Had to reset the time on the dashboard but no reprogramming.
I have 2001 S80 2.4T 147 KWT gasoline.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 3525 Views
-
Last post by ajwsurfer
-
- 2 Replies
- 3943 Views
-
Last post by antonevane






