LoL: tools tools and more tools...

Post by **xHeart** » 06 Oct 2012, 15:00

Every tool there is...Mand_Tool_list_010511.pdf

Post by **precopster** » 07 Oct 2012, 06:17

Thankyou for posting this list. Goes to show exactly how specialised car repair can be, though I'm certain that half of them can be fabricated cheaply or substituted with good 'ole ingenuity!!

Post by **cn90** » 07 Oct 2012, 08:56

1+,

Nice list of specialized Volvo tools.

However, I'd say 95% of the tools listed are not needed for the average Volvo owner, who only needs:
1. OBD-II reader...and
2. Any special mechanical (non-computerized) tool can virtually be made using one's creativity.

On the same topic, I'd like to know what everyone would say is a Volvo-only tool, i.e., a particular job can only be done using a particular Volvo tool and no other tool found on earth!

Post by **xHeart** » 08 Oct 2012, 06:49

cn90 wrote: On the same topic, I'd like to know what everyone would say is a Volvo-only tool, i.e., a particular job can only be done using a particular Volvo tool and no other tool found on earth!

The subframe bushing topics at MVS references this Volvo tool... #999 5457.

: Is there a substitute...; MVS_Tool9995457.jpg (159.11 KiB) Viewed 2962 times

In my to-do, it is 9995457 Subframe Bushing Press Tool, see page 5, for which I have not found a substitute. At aZone, there are tools from OEM, and O'Reilly has another.

Post by **xHeart** » 09 Oct 2012, 09:33

I called the 800 number, anyone can buy Volvo tool. It may take a week to get it, so plan ahead.

Post by **erikv11** » 17 Oct 2013, 22:50

Anybody looking to replace a subframe bushing or two?

http://volvospeed.com/vs_forum/topic/16 ... n-9995457/

Post by **xHeart** » 18 Oct 2013, 17:21

What is a good offer?

erikv11 wrote:Anybody looking to replace a subframe bushing or two?

http://volvospeed.com/vs_forum/topic/16 ... n-9995457/

Post by **erikv11** » 19 Oct 2013, 16:10

Not sure but I would bet there is not a red hot market for those tools. I might call him up and offer something like $140 shipped, will certainly fit in a USPS flat rate box.

Post by **xHeart** » 25 Oct 2013, 17:25

Dietsch Werks awesome people. http://www.dietschwerks.com

erikv11 wrote:Not sure but I would bet there is not a red hot market for those tools. I might call him up and offer something like $140 shipped, will certainly fit in a USPS flat rate box.